It
is usual that fleet users always like to introduce new ways for
cutting down the expenses. One of the best ways is to keep the trucks
in good running condition through maintenance. Moreover,
modifications can enable the trucks to run smoother and burn the
least amount of fuel. Here are some ways, which are suggested by
experienced technicians to overcome the fuel cost:
The
Effect of Oil Change
Synthetic
oil as well as filters of high capacity should be used. Synthetic
motor oil is capable to maintain the lubricating attributes for a
long time span. As a result engine works with little friction and
maintains the temperature of the engine.
Maintain
the Exhaust System and Air Filter
Most
of the vehicles need an improved exhaust system. High flow exhaust
system is better to purchase to enhance the fuel capacity. On the
other hand, if the truck is running in a trouble mode, check the
exhaust system and improve the air filter as well. Monitor the spark
plugs.
When
the truck covers 60000 miles distance, replace the spark plugs if
there are platinum plugs. In case of copper plugs, replace them after
7000 miles distance. Spark plugs show that the motor is working lean
or rich. In case the motor is working rich, the truck will use a lot
of fuel. On the other hand, lean mode shows the deficiency of fuel.
Purchase
the Tires and Check the Pressure
Purchase
one complete set of tires for your truck. There should be one set for
snow driving and another set for highway driving. In case you are
living in a moderate winter climate, use one set of tires for all
roads. Always check the pressure to enhance the fuel capacity. You
have to check tire pressure often for better performance.
Helper
Springs
Suspension
is one of the important things which cannot be ignored. Bulging tires
create friction and burn a lot of fuel. Metal springs or air springs
help the operator to accommodate the truck load.
Shift
and Gear Ratio
In
old trucks, life can be increased by transmission repair. Install a
new shift kit to enhance the durability and firmer shift.
Cut
down Unnecessary Accessories
Check
the necessaries used in the truck. If there are additional or extra
accessories, it can increase the weight and burn more fuel. You can
take off front air dams and bully bars.
Use
oil catch can
Oil
catch can help by collecting the mist from the rotating parts and
protect form gunk. Oil catch can enhance the ability of the engine as
it does not let the oil mix with gasoline.
Use
new electrical grounds
For
older trucks, it is better to use new electrical grounds like 02
sensors, mess air flow, sensors so that computer system can
communicate easily with electrical ground.
Use
fuel injection purifier
Gasoline
is a kind of fuel injection purifier, which is used to clean the
intake valves and keeps the upper cylinder lubricate to enhance the
maintaining capability.
seo@pixionwebdesign.com
No comments:
Post a Comment