Are you worried due to an
unappealing dent on the car? Definitely, it looks horrible and needs
a great amount to revamp. The car ding is repaired by slide hammer
and welded-on-studs; however it is an expensive way. Body filler is
best for home mechanics to fix minor dents and dings. The serious
dents need to change the panel; nevertheless slight dings can get
repaired with efforts. If you do not know how
to fix your car’s dings and dents,
follow the instruction cautiously.
Purchase the Necessary Tools:
First of all, you must have all the required
tools to start the work. These are Body filler, hardener, primer,
auto paint, clear coat, and polishing cream. Purchase safety glasses,
nitrile gloves, orbital sander, buffing pads, spreading paddles,
masking tape, clean rags and a respirator.
- Grind To Metal:
First of all, the primer and paint must be
removed. Either use abrasive pad or die grinder. It is possible to
eliminate the paint with sandpaper. Keep in mind; do not scare the
car surface by excessive use of sandpaper.
- Mix Properly:
Work with a polyester resin (two-part)
triggered by hardener. Take out the filler and use it on a mixing
board. The most important function is to use the right amount of
hardener (about 50:1). Mix the consistent color and use spreading
paddle for some moments. The right color is light pink or blue.
- Spread Equally:
As the compound is completely mixed, try to
complete the work within seven minutes as the hardener helps in
completing the task instantly. Apply the given filler in even
strokes on the damaged area. Try to work patiently as sloppy
performance will waste the money. Excessive use of compound takes
your time in sanding the surface.
- Smooth the Spot:
Let the filler for 30 minutes to get hardened
properly. If you have time, better is to give some more minutes. Now,
smooth the spot with sanding in slow motion. Check the nature of spot
by touching it with naked hands. If the surface is not even, clean
the spot with a rag to apply filler.
- Preparing for Paint:
The last task is to use the paint. Either
paint the spotted area at home or get the services of professionals.
In case, you like to paint it yourself, bring a primer and start
light coating for faultless finishing. You can purchase the paint
color from the wholesaler. Try to custom mix the selected paint to
match with the paint of the car. Make light layers of preferred paint
on the selected area. Use polish to get a shiny surface.
It is necessary to use gloves and glasses to
remain safe from toxic fumes. Moreover, the work should be performed
in an open or ventilated area. Do not forget to use mask while
sanding. The denting and painting work at home can make you
experienced and save your salary from unnecessary expenditures.
Always perform the above mentioned procedure by wearing the safety
measures.
seo@pixionwebdesign.com
No comments:
Post a Comment